 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Accidentally put a1/2 to 3/4 lb of r22 into a flat r410 sys
Accidentally put a 1/2 -3/4 lb of r22 into a flat (due to leak ) r410 system. Ran gas and vapor through the compressor then realized I made the mistake. Immediately purged out presssure to flat again. Came back 4 days later did nitrogen leak check,evacuated to 250 microns recharged system with 410. System seemed to run fine. Do you think I'm OK here?
|
||||
Check out some similar questions!
9 months ago I had my evaporator go out on my A/C. I was faced with the question everyone is currently facing, go to R410 or stay with R22. If I stayed with R22 I didn't need to change the compressor. I spoke with the repair people (from home warranty) and they told me I could install evaporator...
I have a pentair mini max plus hp600 pool heat pump heater. The compressor appears to be locked up. The unit says it is a r410 and the manufacturer agrees. The problem is to replace the compressor with the same compressor model is $1600. Here is the rub, the oem compressor says r22 on the...
Can a condenser unit that is rated for R410 run on R22?
We are wanting to install a new centeral air system and would like to know whether to use a system with R22 or R410? >Moved from Forum Help<
Has anyone taken out R410 from a R410 system and put in R22.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
