Adding a.c to a coleman furnace model 3400a816

weasel43 Posts: 1, Reputation: 1

New Member

May 27, 2012, 07:26 PM

Adding a.c to a coleman furnace model 3400a816

I'm adding an ac unit outside an will have to change the blower to a 2 stage blower but need to know what size I would need. Any ideas

Check out some similar questions!

Coleman evcon furnace model # EB178 [ 3 Answers ]

When I turn the thermostat in the auto side nothing happens but when in the manual (ON) position the furnace works. What do you think my problem is. I replaced a blower relay that was humming but that didn't seem to do the trick.

Coleman furnace model eb17b [ 2 Answers ]

Occasionally an alarm sounds on our eb17b funace. A label mentions something about an attic fan needing servicing. We don't have an attic. There is a hose above the funace that goes to the roof. Is there a sensor up there that needs servicing?

Coleman 3400a816 [ 1 Answers ]

We have a Coleman 3400a816 electric furnace. Only one or two of the three elements are working.Do these elements need to be replaced of are there other things that could cause this problem?

I have a Coleman electric furnace mdl# 3400A816. I need a new blower motor [ 2 Answers ]

I can not find the proper part number or where to order one. Any help would be greatly appreciated!

Coleman Electric Furnace Model 3500A816 [ 1 Answers ]

I am trying to help a friend with a heating problem. He has a Coleman Model 3500A816 electric furnace with a heat pump which are controlled by a Honeywell Chronotherm T8611G1103 thermostat. It appears that the heating elements are not being turned on because the air from the registers is not very...

View more questions Search

Check out some similar questions!

Add your answer here.