Ask Experts Questions for FREE Help !
Ask
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #1

    May 27, 2012, 08:14 AM
    How to Remove A Broken Ceramic Toothbrush Holder
    It is attached with ceramic tile along side. I thought about a chisel and hammer. But my wife said I would break the adjacent tile .
    How would you do it?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    May 30, 2012, 06:08 AM
    If u have a multi tool, u can cut the holder into sections and pry out. Be sure to wear safety goggles.

    Chuck
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #3

    May 30, 2012, 06:49 AM
    Yes I do have a multi tool. And a ceramic drill bit Thanks
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    May 31, 2012, 03:05 PM
    They make a carbide saw for a multi tool. Cut around the grout and try to pry out the old pieces. BEWARE you may pry out some of the drywall too and then have to put in a patch.
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #5

    May 31, 2012, 03:09 PM
    Thanks gang. I use the multi tool around the grout first. Then with a hammer and chisel
    I tapped it off.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #6

    May 31, 2012, 03:14 PM
    There you go!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

How do I remove ceramic tile from concrete block walls? [ 6 Answers ]

I tried using a heat gun without success so far; the heat works well to remove the mastic after tile is removed but does not seem to be much help as I try to remove 4" by 4" tiles from the wall without breaking them. I was hoping to remove whole tiles in one area with the goal of using them to fill...

How to remove ceramic tile mastic from hardwood floor. [ 4 Answers ]

I removed an old ceramic tile floor in my foyer that was put down over hardwood flooring. The tiles came up pretty easily as they had been there about 20 years. The leftover residue of mastic and grout is pretty brittle. I would like to know the easiest way to clean that up and try to sand and...

Remove ceramic tile mortar after tiles removed [ 3 Answers ]

I am remodeling a small bath in a high rise. I have removed the small 1"x1" old tile but the 1 inch thick plus mortar still remains. It was poured over a 5" think concrete slab floor of the high rise. How do I get this mortar off? Can I install marble over this mortar without removing it? Thanks

How to remove ceramic tile removed from concrete floor [ 3 Answers ]

There is a 3'x4' area of ceramic tile at the base of my stairwell between living and dining areas. Laminate flooring will be laid. Is it necessary to remove the small area of tile? Or, can laminate flooring be laid over it? If it needs to be removed what is the simplest way? :(

How do you remove ceramic fireplace tile front? [ 1 Answers ]

We are in the process of restoring a circ 1890 Victorian house; today’s subject is CERAMIC FIREPLACE FRONTS. The tiles used are Trent, about 3” long by 1.5” wide. There are a few missing but we have a plan that we can live with. The wall, that the tile is mounted on, has deteriorated and many...

View more questions Search