Ask Experts Questions for FREE Help !
Ask
    bhannah's Avatar
    bhannah Posts: 3, Reputation: 2
    New Member
     
    #1

    May 26, 2012, 11:33 PM
    Replaced thermostat and no ac fan is blowing
    My son replaced an old mercury thermostat with a new digital. First night felt great with ac. Then nothing but some air blowing but not cold and it's 84 here. UGH.

Check out some similar questions!

My a /c unit is not blowing cool air after I replaced fan motor and added freon? [ 1 Answers ]

I have just replaced the fan motor in my a/c unit, and charged up the outside unit with R22 freon. Why is not blowing cool air?

I central /c unit is not blowing cool air after I replaced fan motor and added freon? [ 1 Answers ]

Central A/c unit is not blowing cool air after replacing the fan motor and freon.

Just replaced thermostat and now york air conditioner blowing hot air [ 1 Answers ]

Just changed broken honeywell thermostat with same model. Turned it on to cool, and now the system seems to be reversed? Thermostat set to cool, but outside the freon pipes are very hot to touch and wind coming out of top is cool. Hot air is coming out of vents as if the heat were switched on. ...

Replaced thermostat now heater is not blowing hot [ 1 Answers ]

Replaced thermostat now heater is not blowing hot or very hard / I thought I had the power off when replacing the thermostat but didn't and arked two wires / the temp rises but very slowly and no sure if that was because of the outside temp

Furnace won't stop blowing air - replaced the thermostat [ 4 Answers ]

I have a Janitrol U-29A that is probably about 8 years old. I don't when it started, but sometime over the summer it began acting up. The blower does not stop blowing air unless I turn off the furnace at the circuit breaker. The AC unit outside turns on and off through the thermostat, but the...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.