 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hot an cold reversed with my Honeywell RTH 2300
I have installed a Honewwell RTH 2300 to my home system and after hooking up my wires as follows:
B = blue wire W = white wire Y = yellow wire G = Green wire R/Rc = Red wire to R terminal with jumper intact My sys. Is a heat pump (electric) with a trane unit outside and an air handler in the attic Cool setting blows hot, and hot (with fan in on position) blows cold What wires do I have crossed ? DO NOT have the legend for the old wiring avail |
||||
Check out some similar questions!
I have an old airco gas furnace, I want to change the thermostat to a RTH 2300, problem is I only have two wires to connect to the thermostat a white and a black and am not sure where to put them? Help
Hi, I bought a Honeywell RTH 2300 thermostat and I'm trying to hook it up, the wires I have coming out of the wall are white, green, red, yellow and blue. I hooked up the matching colors to the W, G, R, Y and the blue wire I attached to the O/B. I have the jumpers set as follows: jumper 1 HG and...
Hello, My shower hot & cold water connection were reversed. Meaning in the cold water supply, hot water is coming out. It's hard for me to tear down the wall and reverse the connections because I'm not a handyman:confused:. Can you help me solve the problem?:confused: Can I just replace (if...
Hi. I have installed my delta faucet (one handle).. the scald guard faucet... in the "off" position, the handle is at "3-o'clock".. to turn it on, you rotate it counter-clockwise... in the fully "on" position, the handle is at "12 o'clock"... however, hot comes out first... then cold... so,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
