Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tapping plastic supply line
[ 2 Answers ]
Need to run water supply line to new water and ice equipped refrigerator. Have reverse osmosis system with 3/8" water line (plastic) to spout. Need to tap inline for a 1/4" line (plastic) to fridge. Do I use a tee 3/8" to 3/8" to 1/4" or a tap with a 1/4" with shut off valve? Scott S
Tapping off a 240V line
[ 1 Answers ]
I am removing a double oven with a 240V breaker. I will be replacing it with just a single oven but would like to build in a Microwave below it. Can I put in a junction box and then pull a 120V line off on 1 leg and a neutral? The microwave would pull a lot less than the 2nd oven. Thanks
Connecting new 220V line & tapping off a 110V outlet.
[ 4 Answers ]
I have a 220V outlet on the outside of my garage, originally intended to power 220v compressors, welders, etc. I am installing a well not far from this outlet, which needs 220V and I want to run a line from the outlet (underground) line to the pump. How do I do the connections to the pump and can I...
Tapping into Septic Line
[ 2 Answers ]
I have just added a new shower to an existing bathroom with just a toilet. I would like to tap the shower drainage line into the toilet line that is running out of the house into our septic tank. I have never tapped into an active line. Advice on what tools, and techniques should be used to tap...
Tapping a gas line
[ 4 Answers ]
Is it possible to tap into a gas line to tee off for another appliance? Two story house with the main living area upstairs. Garage is under the front half of the house, which is the living room and kitchen. Here's why I ask. My main gas line (3/4" black iron) travels across my garage ceiling... View more questions Search
|