| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Running in wall Coaxial Cable from Existing wall
 [ 7 Answers ]
 Hi there, Is there someone here who is expert on electrical? I need help on running coaxial cable to my existing walls. I have a 1st floor where I have access to drilling holes into the second floor. I am willing to cut open holes for installing the single gang boxes. Now, here are my... 
Installing coaxial cable
 [ 3 Answers ]
 I need to run a coaxial cable wire to an existing building. It cannot be ran overhead, it has to be underground. Instead of direct burial, I already have a conduit with #6 wire in it for power. Can I, or would it interfere with the cable, if I was to run it in the conduit with the power? 
Grounding an antenna with coaxial cable that has a ground wire included
 [ 1 Answers ]
 We installed an antenna next to our trailer on a mast pole. The coaxial cable we used had a gound wire in it but we didn't use it. We grounded the pole to a grounding rod in the ground and connected copper wire to it. We didn't connect the ground wire inside the cable at all. Is this a mistake? 
Wall mount for cable, how do I prepare for cable line?
 [ 3 Answers ]
 I want to move my T.V. across the room, I have a wall mount with the wire there. What do I do to the wire that is not cable prepared to look like the one that is now being used? I need step by step instructions. If anyone can help me please!! :confused: Signed single mom trying to save a few... 
Running coaxial cable above fireplace
 [ 1 Answers ]
 Hello, I just bought a LCD TV and I want to put it above our fireplace. I want the wires to run in the wall and into our cabinets along the side about 3' away. Are there things I need to know about cutting into a wall above the fireplace? Is it the same as cutting into and pulling wires... View more questions Search 
 |