Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to lubricate the fan motor and fan bearing on a Carrier WeatherMaker 9200
[ 0 Answers ]
How do you lubricate the fan motor and fan bearing on a Carrier WeatherMaker 9200 gas furnace model 58MXA080-16
Fan Motor or Blower Motor? Trane XB80
[ 0 Answers ]
Outside fan motor clicks and hums - are the fan motor (outside) and blower motor (to circulate the air) tied together? i.e. if one is out, neither will work? If so - how do you diagnose which motor is out? This is on a Trane XB80 Furnace & Air Conditioner
New fan motor new capacitor motor burned up
[ 2 Answers ]
Air went out. Replaced outside motor fan and capacitor and it burned up again. Fan was very hot when I took it out. Causes?
Trane condenser fan motor to A.O.Smith condenser fan motor
[ 2 Answers ]
The Condenser fan motor I removed from a Trane unit had four wires 1 black, 1red, 1brown and . The black wire went directly to #3 on the relay, the red wire went to the capacitor with black wire from #6 on the relay the brown wire went alone to the other side of the capacitor. I purchased...
New Fan Motor - WIRING issue - not the same as old motor - SIBERIANAIR - are you here?
[ 3 Answers ]
I have a 7 year old Trane XE 1000 and 2 days ago the fan simply stopped spinning. It has been determined that it is the fan motor. I went and bought a new one but this motor comes with 4 wires (Black, White, Brown and Brown with White stripe). The old motor came with three wires which were Purple,... View more questions Search
|