Ask Experts Questions for FREE Help !
Ask
    moofyoglory's Avatar
    moofyoglory Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 19, 2012, 07:26 AM
    How to change the cord on a 1935 Sunbeam mixer model 1
    We bought a 1935 sunbeam stand mixer model 1... how do you replace the cord... we have new cord but don't want to open the case incorrectly! HELP
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    May 20, 2012, 12:11 PM
    It's really very easy to do: You just remove the screws after laying motor on a clean surface. You also should have either white lithium grease or a food grade grease to repack the bearings and gears while you have it apart. The bearings are probably dry.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Manuals for 1950 sunbeam mixer? [ 0 Answers ]

We have a 1950? Sunbeam mixmaster white, black stand and two milk glass bowls also white. We cannot figure out how to release the beaters, we think that turning the handle might work but not sure and do not want to break mixer which works great. Thanks Yvonne Phillips

Replace power cord on sunbeam mixmaster 11? [ 0 Answers ]

How do I take apart a Sunbeam Mixmaster, model 11, to replace the power cord? And I would like general disassembly directions for the unit so I can clean out the old, gunky grease and re-lube it.

How to change a3 prong cord to a 4 prong cord for an electric dryer [ 2 Answers ]

I moved into a house that has a 4 prong outlet and my dryer has a 3 prong cord, how do I go about changing the cord. I called an electrician put the job is to small for them to come. My manual only has about the where to put the neutral and the grounding wire but does not explain which screw to put...

Mixer sink -how to change the washer [ 0 Answers ]

I need to know how to change a washer or cartridge in a mixer tap

Can I replace a 240v plug/cord with a 110v plug/cord on a KitchenAid Mixer (5KMP50)? [ 5 Answers ]

I have acquired a KitchenAid Heavy Duty 5-quart 10-speed Mixer model #5KPM50, which has a European-style 240v plug. I know there are converters available, but I want to replace the 240v plug with the standard 110v plug used in the USA. Can I replace just the plug or should I replace the plug and...

View more questions Search