 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kohler pull-out kitchen sink faucet troubleshooting
I have a pull-out spray kitchen faucet that all of a sudden flows out slowly. It doesn't leak, and the sprayer still works, But other faucets in the house are fine. I checked the little screens and there isn't anything blocking the water. What can I do before calling a plumber?
|
||||
Check out some similar questions!
I am trying to remove single handle from kohler K-R648.(Water is oozing from handle.) I have removed set screw, but handle will not come off. I don't want to force too hard and break something. Any suggestions.
I replaced the creamic filter in my Kohler faucet. When I turned the water back on the water flow has no pressure. The spray hose works, but no pressure out of the faucet itself. Any ideas why?
Cold water side is not working suddenly. All water is on.
I have a Kohler K-10412 single control kitchen sink faucet that is leaking. I have read earlier answers on this site about how to repair it, but I am stuck at the point where the handle has been removed. How do I remove the bonnet, part #1003662? The directions said "lift up part 103662", but I...
I have a Kohler kitchen faucet, model K-10412, I think. Because of leaks I am trying to replace the o-rings for the spout. Everything I have seen says that the spout should just lift off after the bonnet nut is removed. Mine doesn't. It moves about 1/4 inch and won't move any further. Can you help
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
