 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Low water pressure at faucets
We changed a water hydrant outside, turned the water on and it plugged up the lines with calcium. We cleaned the valves, blew out the lines with a air compressor and we still have low cold water pressure at the sinks. Do you have any ideas?
|
||||
Check out some similar questions!
I have just had to replace the heating elaments now I have very low water pressure on the hot water side only only with 2 locations. Location 1 is the washer by the tank & the other is the jack 7 jill that's not even the fartherest away.
Just fixed two leaking Peerless faucets (two-handles, one spout) in the bathroom and kitchen; in both cases the hot water couldn't be fully shut off. The shutoff valves didn't work, so the house shutoff valve was used. (In the process of finding it I first tried shutting off the HW heater intake...
Title says it all. I read and reread all the other posts asking this same question but am still unsure so let me lay it all out. I am on city water using an electric HW heater. I have recently noticed a drastic drop in pressure on the hot side only (all faucets /showers). When I first turn the...
Hello, I am new to this please bear with me. I have a problem with my kitchen faucet.. both the hot and cold run fine for about 20 seconds then the pressure goes down to a trickle. However, the sprayer works fine. The faucet was installed about 5 years ago and never was a problem. Thanks, Have...
Why does the water pressure in my house drop to almost nothing when 2 or more faucets are turned on?:confused:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
