 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Capping the gas line is pretty simple. Just buy a cap that fits the line size that you have - and be sure to use some good pipe dope or teflon tape on it... then when you are done test for leaks using a thick soapy solution.
If you've not worked with gas lines before, you should have a professional do it so that you are sure it is put on correctly, and that there are no gas leaks. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Got a new gas range. The old range had a yellow gas flex connector and fit perfectly on the brass flare end of the supply pipe, but the new steel connector is too big for the flare end fitting of the gas supply pipe, although just right for connecting to the range. The house was built in 1957, and...
I bought a house that has a copper gas line that used to go to a gas dryer. I no longer have the gas dryer and don't intend to get another. The previous owner didn't cap the line. I was willing to give the excess line to the plumber who came for a different job, if he capped the line (he supposedly...
Gas shoots out the gas cap when you prime the chainsaw
We use a regency Gr55-3 ~20,000btu gas fireplace for heating our bedroom. Its about 10 years old and has given us no trouble before. The gas supply line is a small (3/8"?) flexible copper tube that runs about 40' from a prv. I believe the prv lets pressure down from 2psi to a few inches of...
The gas cap release lever on my 2003 Honda Accord has stopped working. Periodically it will not release but does eventually release. This time it will not release and I am about out of gas! Does anyone know what is wrong or how to get the latch to release?
View more questions Search
|
