Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What would I use in a bathroom floor if the floor is uneven
[ 0 Answers ]
Advice pleas, We have a bathroom floor that is very uneven( it's very old) and on lifting some floor boards near the bath all the pipe work has been cut out of the joist and is level with the top of the joist.I assume any other pipe work has been done the same but do not know the runs. How would...
Uneven kitchen floor
[ 2 Answers ]
I am doing my kitchen floor and the floor is uneven I am placing a subfloor , would it be better to use individual tiles or whole sheet linoleum,just wondering if I place individuals tiles would the tiles eventually come loose also will the sub-floor even out the floor thanks a lot for any advice
Seriously uneven basement floor
[ 1 Answers ]
I am buying a house that has a basement floor that is very uneven. The home was built in 1937 the basement floor is like valleys and mountians (a few inches up here and a few inches down there) is there any way to repair this and lay a good floor without breaking it up and pouring a new floor....
Uneven basement floor
[ 2 Answers ]
In our newer home, the basement was poured very unevenly. It cannot simply be filled as the uneveness is throughout a large area. (Imagine rolling hills!). What are the options for addressing this problem and what kind of costs are likely to be associated with each (e.g. hundreds or thousands of...
Uneven flange below floor
[ 2 Answers ]
When I am facing the wall with the fresh water supply line - here is the situation in the house I just moved into. The back tip of the toilet flange is level with the floor and the other half is about 1 and 1/2 inches below the floor level. The flange is 3inch PVC. One side of the flange is... View more questions Search
|