Ask Experts Questions for FREE Help !
Ask
    beginerplumber's Avatar
    beginerplumber Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 13, 2012, 10:42 PM
    Convert a 2 handle tub & shower valve to 1 handlewith no access from the back?
    How do I convert a 2 handle tub & shower valve to 1 handlewith no access from the back?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    May 14, 2012, 06:29 AM
    Quote Originally Posted by beginerplumber View Post
    How do I convert a 2 handle tub & shower valve to 1 handlewith no access from the back?
    You purchase a chrome remodel plate. This covers the holes and converts it so am one handled valve can be installed. Good luck, Tom
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Stanadyne single handle tub&shower faucet repair [ 4 Answers ]

How do you dissassemble and where do you get repair parts. It leaks from behind the knob into the tub and behind, dripping onto lower level concrete (tri-level house).

No hot water (at all) -- Moen Brantford Posi-Temp Single-Handle Tub/Shower Valve [ 6 Answers ]

There is no hot water. Period. When I turn on the faucet there is only cold water. If I turn the handle all the way counter-clockwise, the water flow stops completely -- not even cold water. There is hot water in every other sink/shower in the house (including the sink in the same bathroom). This...

Koehler single handle tub/shower handle leaks [ 2 Answers ]

I have a koehler single handle tub/shower asselmbly. The faucet is in the tub, the shower head obviously above and the single handle is in the middle. You pull up on the lever to turn on the water and left to right for hot and cold. You do not have to put it back to center to turn off. Anyway....

Stuck middle valve - 3 handle shower valve [ 3 Answers ]

Help and suggestions!! The middle handle, used to divert water from the tub spout to shower head is stuck in the 'tub' position. I have removed the handle and trim bezel and tried to turn the shaft with pliers - no luck & quit before marring the splines on the brass shaft. What now??

Diverter stem installation - three handle shower & tub faucet [ 4 Answers ]

The house is well over 25 years of age and I have replaced both hot and cold water valves and tub faucet without removal of bath and shower stall tiles - still look good. Purchased a diverter stem (Galtmaster tub and shower models - 1963 to 65). With the old diverter I would turn clockwise to have...

View more questions Search