Ask Experts Questions for FREE Help !
Ask
    lboser1's Avatar
    lboser1 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 13, 2012, 01:43 PM
    Shower stall
    We installed a shower stall, do we need to caulk around the outside of the base before tiling the floor.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    May 14, 2012, 11:57 AM
    You can but you will either caulk or grout the floor later.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How big should the cut out be for a shower handle on a stall shower [ 1 Answers ]

I am in the process of having a stall shower installed and the handyman has cut a large hole in the wall to get the shower handle through the side of the shower. This hole will be covered up by the metal covering for the shower handle but I'm concerned that there's such a large hole under the cap....

Fiberglass shower stall, new shower set [ 4 Answers ]

We just bought a new shower set for our bathroom but found out we have a problem. It's a fiberglass, 1-piece tub/shower and the hole where the valve comes out is too small to remove the old one. We have two bathrooms and the other tub/shower is back-to-back with the one we're trying to change. This...

Shower stall need height of controls and shower head [ 1 Answers ]

Hi Am building a shower and require the height of the taps and the shower head

Turning walking shower stall into bathtub/shower combo. [ 4 Answers ]

Question: Current shower drain (2" pipe) runs 5 feet, under slab, to vent stack (5" cast iron vent pipe) of toilet. Will need to move the drain 3ft to wall for new tub. After moving the drain, the complete length of the pipe will still be around 5 feet. We will have to reduce the drain line...


View more questions Search