Ask Experts Questions for FREE Help !
Ask
    Twinman's Avatar
    Twinman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 11, 2012, 12:05 PM
    Husky riding mower on/off switch
    I was given an older model Husky riding mower and I was out mowing with it last week-end when it just died, and when I tried to re-start it the on/off switch would not work. Can I replace it with a toggle switch or do I need to try and get a new switch itself? I am NOT sure if I can even buy the switch anywhere. I would appreciate ANY advice you can give me...
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 28, 2012, 11:53 AM
    Hi,
    It would be far better to simply replace it with the original part. One plug and one nut holding the switch on. Might by slightly more expensive, if you do not count your time, and then it is cheaper.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why would someone put a switch on riding mower that has to be on to start it [ 1 Answers ]

Kids riped the wires off I don't know how to wire it up don't know if you no how to wire it up

Husky riding mower [ 0 Answers ]

A diagram how to put a belt around the pullies on a 46 inch deck?

1999 Husky riding mower [ 1 Answers ]

My 1999 Husky riding mower will not turn over unless you jump the starter or the solenoid. I just replaced all the wiring from the battery to the engine, new ignition switch and solenoid, and it still will not turn over. What else would I nees to check or test.

Husky riding mower won't start [ 1 Answers ]

Hello, I have no spark on my 11 HP B&S model #3611-43 (44-20090). Any help on what part I may need? Thanks, Faye

Murray riding mower switch [ 2 Answers ]

Changed ignition switch,still won't cut off,need diagram about the proper wirering..

View more questions Search