Transformers

ROGER NODRUFF Posts: 1, Reputation: 1

New Member

May 11, 2012, 08:53 AM

Transformers

480/277v primary w/ 120/208v secondary 30kva. What is the most amperage I can get out of it?

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

May 11, 2012, 03:03 PM

Three Phase Transformer Full Load Amps Table

Add your answer here.

Check out some similar questions!

What Transformers? [ 3 Answers ]

its and older one with iron hide being a main character and turns into and 4x4 and bumble bee was some type of buggy and some transformers could merge

Transformers 3 [ 2 Answers ]

Confirmed information * June 20th, 2009 — Michael Bay will be returning to directing duties. * June 30th, 2009 — Ramon Rodriguez will be returning as Leo Spitz in a larger role. * October 1st, 2009 — "Day One" of preproduction work. A story has apparently already been worked...

Transformers [ 2 Answers ]

I'm just wondering if anyone liked the second movie

3-phase transformers [ 0 Answers ]

Consider a system with the one-line diagram shown below. The three-phase transformer nameplate ratings are listed. The transformer reactances are given in percent: 10% = 0.1 p.u. The transmission line and load impedances are in actual ohms. The generator terminal voltage (magnitude) is 13.2 kV...

Help with transformers PLEASE! [ 1 Answers ]

I have to make a simple transformer, that measures the output voltage from the secondary coil, with relation to the distance between the primary and the secondary coil. So, I don't have to make it a step up or step down transformer, I just have to see how the voltage changes with distance. So do...