Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Soil pipe problem
[ 4 Answers ]
Hi, I have an existing 4" vent stack with an old lead elbow coming from the toilet connected to the vent pipe through what looks like a tee. Now I have to get rid of the lead elbow and replace it with abs the problem I have is what to use to connect the abs to the cast iron tee after I get rid of...
Soil Stack Vent Pipe/Stench Pipe ( Smelly Drains )
[ 3 Answers ]
I have a downstairs toilet and upstairs toilet ,one above the other.. The soil/stench pipe connects upwards to above the Roof heaves and downward into the sewer... Coupled into the sewer also is a Gully trap drain to take sink and bath / shower wastes and from time to time , from that drain gully...
Loose soil pipe
[ 1 Answers ]
Having recently replaced my toilet I have found the pipe leading to the main stack loose. The pipe is pitch fibre and joins onto a plastic elbow wich goes straight into the main stack. What is the best way to fix and seal the pitch fibre pipe to plastic elbow?
2 toilets into 1 soil pipe?
[ 2 Answers ]
We (my son & I) are remodeling a 50s bathroom, and creating a new half bath in a newer (90s) master bedroom. The old toilet needs to move, about 6 feet from its current location. The new one will be about 12 feet further from the original drain. The existing setup is all 4" cast iron, down into a...
Cast iron soil pipe
[ 1 Answers ]
Hi I would appreciate very much if someone could clarify some questions I have on oakum/lead joints I have 3 horizontal hub and spigot joints to repair on 4" cast iron sewer pipe. The pipe itself is @ 5 years old. I would like to know if this is the correct way to solve this problem... ... View more questions Search
|