 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Outdoor condensing unit wire pulled out
My husband was weed wacking and he pulled some wires out, they don't look cut and we hooked them back up but the outside fan doesn't turn on, sometimes we can hear it on in the house but it doesn't cool down, what should we try?
|
||||
Check out some similar questions!
Do you hook the gauges to charge the unit to the suction line or liquid line?
I wanted to know why the contactor is not closing to start the compressor and outdoor fan motor, my indoor fan is coming on.
My condensing unit won't turn on when I put my thermostat on A/C cool to 60 degrees and the inside temperature is 89.
There is no charge in my system, it leaked out. I don't have a vaccuum pump, how can I remove the air, could I run some r-22 through the system to chase the air? If so how can I do this. Do the scharder valve o-rings go bad? If so where can I buy them
I installed a new condensing unit and put freon in the unit, I am getting the same pressure on the high and low sides of the gauges. This leads me to believe that there is a compressor problem or that I put too much gas in it. I am reading 150 psi on the high side and the gauge is pinned on the low...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
