 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell Chromotherm III indicates temperature 2 -6 degrees too high.
Thermostat readout only varies between 77-81 degrees during 24 hour period while a highly accurate digital device within inches of it records between 72.8 and 77.1 during the same period. I have a digital temp readout in an adjacent room and it tracks the other digital within 0.7 degrees. I know that the Chromotherm takes wall temp into account but outdoor temp has bee below 71 degrees for the past two days. The thermostat has been in the off mode for two days. If I turn it to the cool mode the AC turns on and reduces the temp to an uncomfortable level and I have to manually turn it off.
Dennis |
||||
Check out some similar questions!
I have a carrier 12 seer ac unit approximately 15 years old. It was working fine until yesterday, the thermostat reads -AC which is a honeywell chromotherm III. What do you think is wrong?
Today the heating/AC thermostat display started showing only HOLD-AC, even though the settings seems to be correct for calling for AC or heating. I see this question has been posted before, but I don't find a previous answer. Can someone help please? Thanks.
My thermostate refuses to come on. It just says HOld AC..
I have a 12 year old Honeywell Chromotherm III thermostat that is now showing repl batt. I replaced the 3 AA batteries w/new ones. The message was still there. I replaced them with another set. Still no change. I went through this process w/3 new sets of batteries from 2 different boxes. Am...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
