Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Where do I install a vacuum relief valve on a cold water supply line for my H2O tank?
[ 13 Answers ]
In order to gain occupancy, an inspector informed me that I need to install a vacuum relief valve on the cold water supply line for my hot water tank. I purchased a vacuum relief valve and the installation instructions that came with it states that it should be installed on a horizontal line above...
Geyser hot water output is too little
[ 0 Answers ]
The hot water output volume or pressure of my recently installed water heater is low. Other things are OK. What is the reason and what can I do to rectify this?
How to resolve hot water from a geyser going in to the cold water system
[ 1 Answers ]
We have a problem with hot water going into the cold water taps. The geyser element was replaced.
Do I need to install a jet pump, a pressure tank and a holding tank?
[ 6 Answers ]
I have a new home with nothing but the 1inch well pipe stemed through the cellar wall. My house is not on town supply line. Do I need to install a jet pump that goes to the pressure tank which then sends water ot a holding tank? Or is the pressure tank by itself all that I would need? Or a...
Installing a 2nd water geyser
[ 1 Answers ]
Hi there, I live in south africa and just started a plumbing company, I recently installed a 2nd water geyser to a large house just to run there 2nd bathroom what has his/hers basind jacussi and a shower and toilet. The main water supply is 3/4 but reduces to 1/2 straight away and that feeds... View more questions Search
|