Ask Experts Questions for FREE Help !
Ask
    Egarcia247's Avatar
    Egarcia247 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 6, 2012, 01:37 PM
    Dryer runs fine, but 10 minutes after cycle, it starts up by itself
    My dryer works fine it just finishes its cycle time runs out and instead of staying off it'll automatically turn on. I am thinking either the relay is bad or the start switch is bad please help.

    Thank you
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    May 7, 2012, 08:51 AM
    You need to use a meter to see if start switch is stuck closed, also you have contacts in timer that are stuck closed. What is the model number and make of the dryer? I can give you a manual.
    Egarcia247's Avatar
    Egarcia247 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 7, 2012, 10:02 AM
    The dryer is a kenmore 70 series. Thank you
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    May 8, 2012, 04:21 PM
    Look at these manuals: http://dl.dropbox.com/u/8010163/Kenm...%20Manuals.zip
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dryer runs fine on regular cycle, but shuts off during permanent cycle [ 1 Answers ]

Dryer shuts down during permanent press cycle

2001 honda crv starts ruff some of the time then runs fine [ 6 Answers ]

Throws code for miss fire in clynder 1. changed plugs, wires, cap and rotor, fuel filter and adjusted the valves

My 1985 toyota pickup starts fine idles fine but runs ruff when in gear [ 2 Answers ]

My 1985 toyota pickup starts fine idles fine but runs ruff when in gear

'89 Civic runs fine for 15 minutes, then bogs, misses, stalls [ 7 Answers ]

I have an '89 Civic 1.5l. It starts fine, runs fine, but after I've been driving it for a while (long after I'd normally say it's "warmed up") it starts to bog and stall whenever I give it the gas. It's OK at high RPMs, but to get it there I need to veeeery gently rev it up, or it will stall. ...

Honda ht 3813 runs fine for about 5 minutes and starts to smoke any input? [ 1 Answers ]

Motor runs fine for about 5 minutes and then it starts to smoke , what could it be??

View more questions Search