Ask Experts Questions for FREE Help !
Ask
    Farn67's Avatar
    Farn67 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 5, 2012, 02:00 PM
    Craftsman 18.5 Lawn Tractor
    Just cleaned a huge mouse nest and a mouse out of my tractor! Engine seemed seized... starter wouldn't turn the crank... lubed it all up and was able to turn it by hand... pulled the Intake and Exhaust pushrods out... all looks good... now it fires but won't turn over... what is the correct setting for the Intake and Exhaust? Appreciated... thanks!
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 26, 2012, 02:49 PM
    Hi,
    That would be 0.006".
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Lawn Tractor - Unable to Start Tractor [ 4 Answers ]

Hello, I currently having difficulty starting my Sears Craftsman Lawn Tractor, (Model# 917.259830). I was using the tractor and had to shut it off to move a lawn hose. When I tried to start it again it just clicked. Specifically upon turning the keying, it makes a click sound followed by a whin....

Craftsman lawn tractor [ 3 Answers ]

We have an older ( 8 to 10 years old) Craftsman lawn tractor that suddenly quit. I checked everything I coulod think of and found the air filter was bad. Thinking I could try and start it without the filter, it started but shot oil out through a port in the breather housing area. Replaced the...

Craftsman Lawn Tractor [ 3 Answers ]

How much trouble is it to change the drive belt on a 15.5hp Sears Lawn Tractor? Seems like the speed of this lawn tractor has slowed down. I am assuming that the drive belt could possibly be stretched. Any onther ideas?

Craftsman Lawn Tractor [ 3 Answers ]

How do I remove the blade carriage from the bottom of the mower?

Craftsman 16.5 Lawn Tractor [ 1 Answers ]

I have recently replaced the mower clutch cable on my 16.5 HP Craftsman LT1000 lawn tractor with a 42" deck. After doing so, the transmission to the tractor will not engage. All the belts seem to be in place. I did not replace the clutch carriage bolt yet, as indicated by the instructions, after...

View more questions Search