Ask Experts Questions for FREE Help !
Ask
    RTerry's Avatar
    RTerry Posts: 1, Reputation: 1
    New Member
     
    #1

    May 3, 2012, 09:33 AM
    How do you remove front cover assembly on maytag msf25c2exb00 refrigerator
    The buttons controlling crushed or cubed ice are reversed. I want to switch the electrical leads behind the switches.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    May 3, 2012, 10:31 AM
    Quote Originally Posted by RTerry View Post
    The buttons controlling crushed or cubed ice are reversed. I want to switch the electrical leads behind the switches.
    That's a manufacturing defect... that would be covered under warranty. Digging into it yourself will void the warranty.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #3

    May 4, 2012, 08:14 AM
    You have to remove the door and the rear cover around the gasket and around the ice dispenser port, then when you put it back together you will have to seal it with silicone.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing a heater defrost assembly for Maytag refrigerator [ 1 Answers ]

Trying to install a heater defrost assembly in a Maytag refrigerator side by side

How do you remove the front cover from a maytag neptune gas dryer model # MDG9700AWW [ 0 Answers ]

I am trying to replace the orifice in my gas dryer to convert it back to natural gas from propane. I bought the orifice kit, but it does not have specific instructions. I know I need to remove the front cover but do not know how to do this. I have a maytag neptune gas dryer, model # MDG9700AWW.

How do I remove the front bumper cover on a 2000 chevy malibu [ 0 Answers ]

Because of damage I need to replace the front bumper cover on my 2000 chevy malibu. How do I remove the bumper cover?

How to remove the front panel of a maytag washer front loader [ 0 Answers ]

Have a model 2400aww maytag front load washer. How do I remove the front panel or what is the best access to the drain pump?


View more questions Search