Ask Experts Questions for FREE Help !
Ask
    8BNOB's Avatar
    8BNOB Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 2, 2012, 09:40 AM
    Simple comfort 2200
    There is no power at my thermostat. What could be the problem
    8BNOB's Avatar
    8BNOB Posts: 2, Reputation: 1
    New Member
    		  
    #2

    May 2, 2012, 09:42 AM
    There is no power at mt thermostat, what could be the problem
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    May 2, 2012, 09:47 AM
    What brand and model do you have? Some run off a battery inside while some draw power from the 24 volt line from the transformer mounted on the furnace
    pjdavis's Avatar
    pjdavis Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Oct 6, 2012, 05:27 AM
    What is the red light for
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Simple comfort 2200 [ 2 Answers ]

My thermostat was loose so I removed it from the wall to put in a couple of anchors to make it tight and the red wire came off, the screen went blank, but then I changed the batteries and a number 3 came on but still nothing works

Simple comfort 3001 therm. How do I disengage programming and use manually [ 0 Answers ]

Recent move therm. Is simple comfort 3001 We would like to keep same temps. All the time except when I manually want to change Downloaded manual not much help...

Replacing Simple Comfort thermostat [ 0 Answers ]

I am wanting to replace my Simple Comfort 2200 thermostat with a digital thermostat. Which digital thermostats do you recommend? Thanks for your time Jayni

Simple comfort 3201 digital controller [ 1 Answers ]

How do I programme the thermostatic digital controller e.g. temperature 72 degrees. Regrads John

Simple comfort 3201 thermostat [ 1 Answers ]

I have a simple comfort 3201 thermostat. I cannot get it off the program mode so I can do it manually. The "prog" flashes and once when I took the cover off to reset there was some clicking as it flashed but that stopped. I just want to manually control the temperature and get it off the program...

View more questions Search