Ask Experts Questions for FREE Help !
Ask
    mtnmiller's Avatar
    mtnmiller Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Feb 23, 2007, 12:18 PM
    Fuel pressure regulator
    I have a 1996 GMC sonoma, (4.3, Engine code W) How much of a project is it to change out the fuel pressure regulator ? Do I need to remove the intake manifold to get to it ?
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
    		  
    #2

    Feb 23, 2007, 05:00 PM
    Just a heads up, on my 1996 the connector between the line and the pump in the tank (pulsation dampner) was bleeding off pressure in tank. Had it diagnosed and replaced the pump twice and pressure regulator at the advice of the dealer before I took a good look and realized the connector was leaking.

    Just a piece of info.
    Don
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fuel smell, Fuel tank leak [ 7 Answers ]

We had a fuel tank leak, how do I get the smell out of our boat? What do you know about a aluminum tank leaking? We have a 1988 Bayliner 34' the tank is located under the back bed, she holds 200 gal, we don't know where the leak is on the tank. We have been told it will be costly to repair, I have...

Fuel injecter or fuel pressure regulator ? [ 2 Answers ]

I have a 1996 gmc sonoma (zr2 package) with a 4.3 motor (engine code W). I sometimes have problems getting it started, when the motor is warm it starts without any problem, but when it is cold I have a hard time getting it started, if I put gas or starting fluid down the throttle body it starts...

Fuel Pump Pressure For Honda Civic 00 [ 1 Answers ]

I would like to know which is the desire fuel pump pressure for my honda civic 2000 according to the manufacturer.

Adjusting Pressure Regulator [ 7 Answers ]

We've had pressure and flow problems for a while. Turn on a faucet it initially has good pressure but slowly tapers off, takes forever to fiill the tub or washer, etc. After contacting the City they came out and said we had 120 psi coming in at the main. They said we probably just needed to...

Poor Water Pressure throughout House - Regulator Valve may need adjusting? [ 3 Answers ]

We are experiencing poor water pressure. We have lived in the house for about 2 years and have never had great water pressure. I noticed what seems to be a regulator valve of sorts on the main line coming into the house (see picture) and was wondering if I can adjust this valve to increase the...

View more questions Search