 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What is the flange called at the motor end of motorcycle exhaust
A friend of mine is working on a 2004 harley dyna wide glide exhaust, they removed the rear pipe to change the gasket, and wound up breaking off the flange that is spot welded to the end of the pipe near the rear of the engine. What is this piece called and can just that part be replaced, or does the entire pipe have to be replaced?
|
||||
Check out some similar questions!
I have a Bryant 398A 90 Plus furnace that is 23 years old. The furnace started making a low whirring noise so I called the heating company. They looked at it and told me that it was the exhaust blower motor. They said over $800 to replace it. They also said get a new furnace. The price seems...
Our pilot light keeps going out. We have replaced the thermo couple many times and the slow opening thermo coupler gas valve. The combustion exhaust inlet motor is very warm, could that be the problem?
I can jumper it and the motor starts the ignitor heats up but no gas
I have a Goodman Furnace 075-3. It recently stopped blowing heat and would just blow cool air. I took the top cover off and confirmed that there was no flame. The gas valve to the furnace is turned on and the switch inside the top cover is also turned to the on position. There is a single light...
The exhaust system for a 14.5 briggs I/c quiet motor... retail is $51.00 (ouch) and I want to find it cheaper... any help is appreciated
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
