Ask Experts Questions for FREE Help !
Ask
    swordsmith_28's Avatar
    swordsmith_28 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 30, 2012, 09:48 AM
    Can you use reverse electroplating on circuit boards?
    Can you use reverse electroplating on circuit boards and if so what mixture would work best?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Apr 30, 2012, 11:19 AM
    Yes:
    https://www.google.com/search?q=reve...I7ADRA_enUS355
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What to do with the mudd. Reverse electroplating [ 5 Answers ]

Hello , I have a reverse electroplating machine and have used salt water as the liquid to carry the currents. It works very well , a lot faster than chemicals I was using before( battery acid). It strips so fast but now I have a buch of this mudd it creates after. Dark brown mudd , yellow mudd,...

Reverse electroplating to recycle precious metals. [ 5 Answers ]

I was just wondering about reverse electroplating. I know the basic process, submerge item in an electrolytic solution and hooked up as an anode, then a second piece of metal to act as the cathode and collector. After which power is supplied the anode metal is ionized and dissolved being...

Goodman circuit boards [ 7 Answers ]

Any suggestions on keeping my board from going out during bad electrical storms? 2 boards in 3 years. Surge protectors?

Circuit boards [ 3 Answers ]

Hi guys quick question what is the terminals on the circuit boards marked m1 and m2?

View more questions Search