 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Well water pump turns on only for 30 seconds.
Recently we've had water pressure issues. When we turn on a faucet it will have good pressure for about 15 seconds then very low pressure. The gauge on the pump reads 60 psi. After reading some forums I saw that the pump should run longer. Could this be a reason for my low water pressure?
|
||||
Check out some similar questions!
My trane heat pump will turn on (the outside part ) then turn off after 5 seconds. It never cools the house. I had an hvac guy come out and he said the freon is full and that he could see no loose connections on the unit. He recommended I change out the new digital thermostat I had installed in the...
Hi, I have a deep well that supplies water to the whole house and in the basement, I have a bladder type water pump. I drained the pump the other day to fix a leak at the pressure gauge and the pipe that it is connected to. After I finished, I ran the water tpo test and the pressure was good and...
We have an 1/2 horse power water pump that seems to be kicking on every hour and runs for 20 - 30 seconds. We have installed a new foot valve and injector in the well and the pump was fine UNITIL 2 days later our washing machine acted up. In a panic I shut off the water pump and all the valves...
I installed a new jet pump with a pressure switch which I do not know its ratings. I hooked it all up. It has a brand new flotec pressure tank. When you turn on the water inside the pump kicks on. THere appears to not be any water in the tank. It is a high pitch sound. At the beginning the...
I have an old pressure tank on my water well without a bladder. It has no water in it and when the control unit turns on it gurgles and shuts off immediately. My well has a deep well pump (75 foot well). I get a slow trickle of water in the house and I replaced the control unit. Should I replace...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
