Wiring question fro Honeywell RTH6350D

mcjmc23 Posts: 1, Reputation: 1

New Member

Apr 26, 2012, 08:16 PM

Wiring question fro Honeywell RTH6350D

I've just purchased a Honeywell RTH6350D and wired it exactly the same as the Old Hunter unit and it will not function No Heat, No AC, No Fan. G=G Whi=Whi Y=Y R=Rh Blu=Rc No dice. What am I missing?

Check out some similar questions!

Wiring honeywell rth6350D with heat pump system [ 1 Answers ]

I'm trying to figure out how to wire a honeywell rth6350d thermostat with my heat pump system. I originally purchased a cheaper thermostat and had someone else install it without knowing that I had a heat pump system. The cheaper thermostat doesn't work with heat pump systems and all that...

Thermostat wiring on RTH6350D Honeywell? [ 1 Answers ]

Hello I like to install a thermostat to a natural gas furnace. Old Thermostat wiring: Honey Well; g-green c-blue r-red w-white y-yellow New Thermostat RTH6350D Honey Well;

Honeywell RTH6350D [ 2 Answers ]

I'm installing a Honeywell RTH6350D thermostat. I'm replacing an old thermostat with mercury and only two wires connected to it. Unfortunately, these two wires are not labeled. How would I hook them up to the new thermostat.

RTH6350D I am repalcing a TA 2000 thermostat with a Honeywell RTH6350D. [ 2 Answers ]

The TA 2000 has W2, O, X, R, Y, G, and E. The RTH6350D has O/B, R, Y, G, E, Aux, and Rc. Which wires go where? (I'm assuming that the wires that have similar terminals on both models are just moved across. But the W2, Aux and Rc don't have an equavalent.

View more questions Search

Check out some similar questions!

Add your answer here.