 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I need the wiring diagram for a 12 horse murray 40" cut approx 2000 model is 40605B from the solonid to starter
I am replacing a honeywell non-programmable with a Lux TX9000TS. The old wiring inputs show e, aux, y, g, o, l, r, b, c (with is optional with batteries) and the new lux is w,y,g,b,o,rc,rh,c. Which wires go were?
There are 4 lights Each light has a bnlack and white wire coming from it. The light switch has a bule wire, a red wire and a black wire from the main housing. There is also a white wire coming from the main housing. The fan operates fine I cannot get the lights to go on. What is the wire sequence?
I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?
I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...
View more questions Search
|
