 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.
A few months ago we had a new water tank put in outside as we have our own well and the bladder went bad in the old water tank. A couple of weeks later we had zero pressure on the hot water thruout our house. The hot water tank inside the house is operating but we can't get any hot water out in...
I just replaced my hot water tank and installed a new one. Now, the hot water pressure in the shower/bathtub (only) is weak - all other faucets seem normal, and the cold water in the shower is fine. Water pressure was fine before I replaced the tank, the problems with the old one were that the...
We replaced a section of hot water pipe that was leaking and so had to turn off our home's main water supply (it was off for about 24 hours). The pipe is now fixed but we have no water coming out of hot water taps, except a trickle when the cold water taps are also open. We have tried opening all...
Replaced a hot water tank, turned the pump on and the water is bypassing the pressure tank. The pressure tank will not fill up and the pump remains on and will not shut off. We do get water though but needs to shut off the pump so it will not burn out. Any thoughts? Thank you Any ideas will...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
