 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Fan shuts off at the same time as gas does, it does not run to flush heat out, as slected to be 90-240sec
We have a payne gas furnace that is approx. 14 years old. The burner ignites, burns for about 10 seconds and then the blower kicks on and blows for about three minutes. The process then repeats itself. We have already tried a new thermostat, to no avail. Any suggestions as to what could be causing...
My Trane BLU model blower cycles on and off about every 5 seconds when theromstat activates furnace to turn on heat up to the set temperature. While the burners are activated the blower turns on for about 5-10 seconds and then turns off for about 5 seconds then turns on for 5-10 seconds and so on,...
My 4-5 year old rheem furnace has a problem. Everything seems fine until the burners start up. They fire up, but only stay on for about 3 to 8 seconds, then the blower turns on but only puts out cold air. I don't think it's an ignitor problem because the burner always ignites. It just started doing...
Please help. I installed a new programmable thermostat (Noma) to replace the old noma one we had. It heats when asked and it cools when asked. The problem is that if the thermostat is set to 18.5 the furnace goes on as soon as it goes 18.3 and stops at 18.8, which maintains the house at the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
