Ask Experts Questions for FREE Help !
Ask
    curtdart's Avatar
    curtdart Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 24, 2012, 06:32 AM
    Need 3-phase answer
    Is a 70 amp 3-phase breaker 70 amp per pole?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Apr 24, 2012, 06:39 AM
    Yes, the 3 will not hold it ay 210 amps.
    If any leg draws more than the 70 amps, it should trip.
    curtdart's Avatar
    curtdart Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 24, 2012, 04:25 PM
    Thanks... I kind of knew that but what I'm working on is a mess! Thanks again!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Single phase phase separation for rotary phase converter [ 5 Answers ]

I have a 240V Roto-Phase converter (ARCO Electric model M) in my shop installed by an electrician. A wire came loose last week and while debugging that I started thinking about the way it was wired and confused myself. My understanding of 3 phase power is that each leg is 120 degrees out of phase...

Converting 220 Single Phase Euro outlets to 110 volt two Phase Us ones? [ 1 Answers ]

I want to convert a euro single phase 220 volt outlet to a 110 outlet

How do I change a 3 phase electrical subpanel to two single phase panels? 5 wires [ 1 Answers ]

We have a building with two separate office suites, but only one meter and remote one sub panel. The meter and feed is 3 phase, 5 big wires to the one panel through a 2.25 inch underground conduit. There is room for another meter in the meter box in the pedestal. Can we run two meters and two...

Service panel is 120 two pole when I check phase to phase I don't get 240 [ 1 Answers ]

Service panel is 120 two pole when I check phase to phase I don't get 240

Single phase vs. 3 phase power - what makes 3 phase more efficient? [ 1 Answers ]

Hi, What is it that makes 3 phase power more efficient? Suppose I need an air compressor for a printing shop and I can choose between a 7.5HP single phase and a 7.5HP 3 phase. Ignoring that the cost of the motor is a little less for 3 phase, why is the motor more efficient and how does...

View more questions Search