Ask Experts Questions for FREE Help !
Ask
    innate's Avatar
    innate Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 23, 2012, 02:27 PM
    Weil Mclain - no heat in part of the system
    I recently renovated a home and installed a new weil mclain high eficiency boiler with 5 zones. 2 zones continue to shut down. After purging they work for a few days to a week and then they shut down again. No visible leaks anywhere. Recently we discovered that the pressure relief valve was bad. Could this have been the culprit?

Check out some similar questions!

Weil Mclain 18yr old furnace - 1 "failed" zone of a 4 zone forced hot water system [ 0 Answers ]

I just bought a house that was built in 1993 and has a gas fired Weil Mclain furnace, forced hot water, with 4 zones - each with a Taco Zone Valve. The system also has one circulator pump. In late fall, I ran the system and all zones worked fine. When winter came and system was on 'full time', it...

I have a weil-mclain boiler. The zone valve opens but no heat in zone. What do I do? [ 1 Answers ]

Have replaced the zone valve actuator, but it doesn't seem to be fixing the problem. What else can I do?

Weil Mclain Lockouts [ 1 Answers ]

Purchased a Weil-McLain Ultra 230 Hot Water Boiler Natural Gas about a yr ago. From basically day 1 have had lockouts. In the 30-50 range over a course of weeks. Now down to 18. Reason: Return temp exceeded the supply temp. Have had numerous visits from Weil Mclain people and people that...

My weil mclain he II is only showing 10 for pressure.is that stopping heat from my s [ 2 Answers ]

I have a weil mclain he II hydro system... the pressure says 10.. does it need to be higher to make the heat work on my 2nd zone on my second floor... it blowing cold... if so how do you increase the pressure??

Weil McLain Gas Heat & Hot Water Boiler [ 1 Answers ]

What does error code E-19 mean?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.