Cast iron horse head

Pulvermacher Posts: 1, Reputation: 1

New Member

Apr 22, 2012, 05:50 PM

Cast iron horse head

I have a pair of 13inch black cast iron horse heads that I'm trying to find the value of. They are at least 30 years old. There are no markings on them. The were not made with the typical ring in the nose, instead there is a bar from under the chin to the neck. Any help would be helpful.

Check out some similar questions!

Is there such thing as a Cast Iron sleeve to put into Cast Iron plumbing pipes? [ 8 Answers ]

Is there a Cast Iron sleeve to put inside Cast Iron plumbing pipes to keep them from rusting?

Cutting through cast iron How is it possible to cut through a cast iron soil pipe [ 6 Answers ]

Cutting through cast iron How is it possible to cut through a cast iron soil pipe

Cast iron vertical from cast iron horizontal can be pvc? [ 2 Answers ]

A leak developed in the main cast iron vertical stack of pipes leading to the horizontal main drain. Unfortunately, for me, the leak was so close to the ground that I had to break the concrete slab of the house. At that point, it just made sense to dig an extra 4 inches or so and remove the bad...

Estimated value - 27# 1800's cast horse hitching post [ 1 Answers ]

Have purchased a 27# cast hitching post. Have listed and lost of people asking for more info... can you provide with estimated value.

Trouble replacing a cast iron 90 with PVC - lumps to the head [ 1 Answers ]

I'm helping a friend replace a section of 4 inch cast iron sewer line that runs across the ceiling in his basement. This cast iron line turns a horizontal corner (90 degrees with a clean out) along the ceiling right at the bottom of his basement stairwell. It's above the last few stairs and...

View more questions Search

Check out some similar questions!

Add your answer here.