Ask Experts Questions for FREE Help !
Ask
    sandeepdoshi's Avatar
    sandeepdoshi Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 17, 2012, 12:34 AM
    Borewell problem query
    Dear Sir,

    We have a bore well, 6 inches in diameter and 480 ft deep. We used a 7.5 hp KSB pump and 22 GI pipes, 20 ft long and 2 inches in diameter to draw water out of the well.

    When trying to remove the pump and pipes for repairs, one of the couplers (connectors) broke and all the 22 pipes and pump fell inside.

    We managed to remove the electric cable. For this, we used 46 rods, each 10 mm in diameter and 10 ft in length. The bottom rod had hooks attached and we pulled all of these with the help of a pulley.

    We also removed 7 pipes using a job. The job consisted of a GI pipe, 1.25 inches in diameter with hooks and strips attached to it. We got back 7 pipes using this but could not remove the others as the job gets very heavy within a few feet of pulling upwards. We think that the remaining 15 pipes maybe in two parts as there is no obstruction till 240 ft.

    We would be highly grateful if you could help us and advise a method by which we can remove the pump and the 15 remaining pipes so that our bore well is functional again.

    It might be useful to mention that we are located in Panvel, Maharashtra where the terrain is very rocky. We hit rocks within 20 ft of bore drilling.

    Thank you for your time. We really appreciate your advice.

Check out some similar questions!

Problem of running sum in query and report [ 1 Answers ]

With the help of Internet Search Engine I found your name as a tutor of ms access. Can you help me to solve my problem? I just want Running Sum in a Query in my daily transactions of the customer FILTER BY ACCOUNT NUMBERS seprately. The fields of which we are calculating is: CLOSING BALANCE =...

How to recover the submercible Pump from the borewell ? [ 5 Answers ]

Hi In my home we're using borewell with sub-mercible pump. Even though the borewell depth was around 200ft, we used to get water at around 50 ft and hence we had used 60 ft lengh pipe and the plastic thread. Due to decreasing water level over the years, we thought of increasing the pipe length...

Low discharge pressure in a borewell submergible Pump [ 0 Answers ]

I have a borewell. A submergible pump is installed to draw water.So far it was taking half hour to fill the overhead tank. Now it takes more than 2 hours. What could be the reasons?

Query on H4 [ 1 Answers ]

In DS156 form, the question no 36 asks has anyone ever filled an immigrant visa petition on your behalf? I have mentioned YES and put wipro technologies. Since I have B1 visa(non immigrant visa), the answer is "no" Thanks to lawanwadee who cleared my doubt.

DNS Query Query. A Query about DNS Queries... [ 12 Answers ]

I am a software developer, I don’t know much about networks. I have a working network but with one weird (well to me it’s weird) problem. If you can offer any insight I’ll be very grateful! <!--- Image Attachment Below (I couldn't find a way to paste it here in the editor :-( ) ---> ...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.