| 
 
 Check out some similar questions!
I have a baxi/combi boiler - hot water changes to cold then hot.
 [ 0 Answers ]
 Please help as it's driving me mad especially when I'm in the shower which is fed from the mains. But it's the same with the taps. Is there anything I can do - other than have an electric shower fitted? 
Boiler works for hot water but won't heat radiators
 [ 1 Answers ]
 Hi my british gas 537/1 boiler heats the water OK but won't heat radiators and the display reads 59 then drops to 39 works for a few seconds until it goes back up to around 60 then shuts out again 
Hot water heat - boiler runs for 15 minutes then cycles on and off every 15 seconds
 [ 0 Answers ]
 Sounds like it is lighting the boiler over and over again. I thought it might be a dirty flame sensor so I used some light sandpaper on the flame sensor but did not reolve the problem. It is a Slant/Fin Victory II Boiler Model VHS-120 EP. Thanks for your help. 
Is my hobart 600 a steam boiler or a hot water boiler.  There is no circulator pump
 [ 0 Answers ]
 I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe. 
Weil McLain Gas Heat & Hot Water Boiler
 [ 1 Answers ]
 What does error code E-19 mean? View more questions Search 
 Add your answer here.
 |