 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I replaced my furnace ignitor and it dies?
I have a 10 year old Carrier 58PAV Series 180 Gas Furnace. 5 years ago, I had to replace its Blade Ignitor. The ignitor just died again. I bought a new replacement and it works for 5 days and died. Where should I start troubleshooting?
|
||||
Check out some similar questions!
6yr old goodman gmt090 running this morning at 830, left house came back 230, house cold reading 57 degrees. Had ignitor replaced in feb of 04, could it be out again..
My 1999 Accord suddenly dies when I'm driving... I just had the ignition switch replaced and it still dies. Any ideas about the problem? And fix?
I have a Kenmore gas dryer which the ignitor is not working. The drum turns, but the ignitor does not warm up. I replaced the ignitor which did not solve the problem. What should be checked next?
Our furnace started blowing out only cold air and the fan seems to run even if the thermostat is off, we tried replacing the thermostat and that was not the problem. It is a tech-4 gas furnace True blue 90. We were told it was the ignitor and that our model would also need to have an additional...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
