Ask Experts Questions for FREE Help !
Ask
    nbeown69's Avatar
    nbeown69 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 3, 2012, 02:48 PM
    My rover lawnmower is backfiring through the carby it runs for about 10sec
    My rover mower backfires through the carby it runs for about 10sec and then stops would this be a valve problem.the compression seems good.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 4, 2012, 05:19 PM
    Hi,
    Generally this is an ignition timing or valve problem. It also might be wise to include the fact that it is an Austrlian mower though it is a division of MTD.
    Manuals: Rovermowers.com.au/Page/Info-Centre/Owners-Manuals
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 6.5 HP 21" lawnmower runs slow after coming in contact with tree branch? [ 4 Answers ]

My Craftsman 6.5 HP 21" 917.376523 lawnmower runs slow after coming in contact with a evergreen tree branch which struck the lawnmower on the exhaust side. I've had this happen on several occasions resulting in the lawnmower running slow and rough. On this occasion it continues to run slow and...

Furnace cycles and flame comes on and say on for 10sec [ 3 Answers ]

Furnace comes on cycles when it get to the flame lighting it lights and goes off after 10 secs... its not the flame sensor I changed it

My Honda engined Yardman lawnmower runs way too fast. [ 5 Answers ]

I had my Yardman lawnmower worked on about 3 months ago. Due to poor weather, I only used it twice right after having it fixed because it wouldn't run. I haven't used it in about 2-3 months, but I fired it up today and the Honda engine races compared to months ago. What can I do to fix it? ...

View more questions Search