Ask Experts Questions for FREE Help !
Ask
    nbeown69's Avatar
    nbeown69 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 3, 2012, 01:50 PM
    Throttle stop switch under governor springs doesn't stop lawnmower
    Throttle switch under govner springs doesn't stop rover lawnmower 10A902 how do I fix this problem?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Apr 6, 2012, 06:15 PM
    Hi,
    That is an ignition ground switch. First make sure the arm contacts the blade of the switch and the wire is intact and connected. My gues is it is the wire.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

General idea on where springs go on governor/throttle linkage? [ 1 Answers ]

I took off carb. To clean on my Lawn Chief, 14.5 horse I/C OHM riding lawn mower. Got it running, but motor throttles way up! I forgot where the springs go. Thinking that's the problem. There's a short heavy duty spring that I don't think is in the right spot. Been searchin for an hour! Where do...

Where do the springs go on governor/throttle linkage? [ 0 Answers ]

I took off carb. To clean on my Lawn Chief, 14.5 horse I/C OHM riding lawn mower. Got it running, but motor throttles way up! I forgot where the springs go. Thinking that's the problem. There's a short heavy duty spring that I don't think is in the right spot. Been searchin for an hour! Where do...

Lawnmower will not stop running! [ 2 Answers ]

I have a Toro lawnmower, 2 year's old. It has 2 levers that join the stationay handle, one that drives the wheels, and one that drives the engine and blades. It still starts fine, however when I release the handle to disengage the blades and cut the motor - it keeps running. What is going on?

Lawnmower will not stop running! [ 2 Answers ]

My lawnmower will not stop running once it starts. I tightened the cable that runs from the handle to the engine, no luck. I saw a green wire that is loose - looks like it should be plugged into something. Could this be the problem - is this a ground wire? Do lawnmowers have ground wires?

View more questions Search