Ask Experts Questions for FREE Help !
Ask
    Betty5595's Avatar
    Betty5595 Posts: 3, Reputation: 1
    New Member
     
    #1

    Mar 31, 2012, 01:00 PM
    How to make a pendant light
    I would like to build a simple pendant light to replace an old pullchain light. My electrican ran new wires to the box in the ceiling but did not install a switch in the wall. It will not be the primary light for the room, just extra light over a desk in a corner.
    I would like to use reproduction cloth covered twisted wires(18/2), and a socket with a turnkey or pullchain that I can screw an uno shade holder to. I have a vintage glass shade that I would like use.
    The guy at the local lighting store told me this was dangerous, and not code. If its not up to code for some stupid reason like I could get hurt fumbleing around in the dark trying to turn it on I don't care. But if there is a legit reason OK.
    Is this a bad idea? What else do I need to know?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Mar 31, 2012, 03:32 PM
    Is this a bad idea?
    Yes

    If its not up to code for some stupid reason
    Like dying a horrible, fiery death.

    What else do I need to know?
    One of the primary reasons for electrical codes is fire prevention.

    You want a pendant light? Go buy one.
    Betty5595's Avatar
    Betty5595 Posts: 3, Reputation: 1
    New Member
     
    #3

    Mar 31, 2012, 04:39 PM
    I would be happy to buy one, but I have been unable to find any that don't require a switch in the wall. That is my problem. I don't have a switch in the wall because my house is 90 years old.


    Some codes are great and for safety reasons. I get that. But some of them are absurd. Like the fact that we are supposed to have an outlet in our dining room every 12 feet. We don't need an outlet every 12 feet, we won't ever need to plug anything in in a dining room. And if we do, the 2 outlet that were already there would have done just fine.
    There was also a stupid code for plumbing, that required we install a new fixture in the shower to turn the water on and off. The old one had a handle for cold water and a separate handle for hot water. The code required we have a dial that turned on cold water first and the turned it to hot. Another stupid code, that was meant to protect the child we don't have from getting in the shower and burning himself. Pointless also because we have a tankless heater, that takes forever to produce hot water.

    The snide comment was not necessary. Lots of people are making pendant lights and selling them online, by doing exactly what I was asking about. Just because I buy one doesn't mean its going to be safe. That is why I posted the question. You didn't need to be a jerk. You should find something better to do with your weekends.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing Light Bulb in Hampton Bay Halogen Pendant Light [ 2 Answers ]

I have a Hampton Bay track lighting system in my dining room and need to replace a couple of bulbs that have gone out. How does the fixture come apart to replace the bulb? The globe is shaped like an inverted champagne flute and it has a frosted cover inside covering the halogen bulb, but the flute...

Pendant or drum light [ 0 Answers ]

I would like to know how to make a pendant or drum hanging light fixture.

Hampton Bay track light - pendant light cord length [ 2 Answers ]

How can I shorten the length of the light cord on a Hampton Bay track system ? There is a tube that plugs into the track that has a serries of screws but there is also a screw at the light base also.

Pendant Light Tripping Breaker [ 2 Answers ]

We just purchased 3 Hampton Bay pendant lights. Each are 12 volt w/ 50 watt bulb with a transformer in each. Here's the problem - My fiancé (an electrical engineer who's hooked up many lights etc) connected one light to test before we cut into the ceiling to set-up the 3 lights since we're...


View more questions Search