 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No water in washer
I have a whirlpool washer model # wtw57esvh1. It won't allow water into the machine. I have replaced the water valve and still the same problem. I get 120 volts at the valve coils with no water still. I have jumper the coils directly and the valve works. Any ideas?
|
||||
Check out some similar questions!
I have a Whirlpool gold Catalyst Washer, serial #CK2713587 and model #GSX9885JQOthat all of a sudden it would start washing, but it will not finishe washing and it holds the water in it. I do not know what could be wrong with it.
Ok, so I just got a new house and the guy who renovated it was one of those "mr. fix-it" type people who knows the concept of what needs to be done, but never does the job right. So he decided he could do everything himself. Here's the problem: when I flush my toilet, drain my tub, run my...
I'm assuming this is a plumbing question... if not, just point me in the right direction. Every time I use my washing machine, water is on the floor in front of it and under it. My husband has been able to stop it at certain times (when it's draining) and wait for the water in the pipe behind...
My kitchen and bathroom sink have no water, period. Hot water seems to be pretty good to the bath and washer but cold water to those 2 locations are very weak. The outside faucet is very weak at best. I have had this problem for quite some time so it's not the fact that they are frozen. I just...
My 17 yr old son recently hooked up a used washer in our garage. We cannot figure out why there is only piping hot water coming out no matter what setting it is on. He did not heed my warning and not wash in hot and he shrunk 80% of his wardrobe to dwarf sized clothing? It also leaks a moderate...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
