 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi mhoney and welcome, Start by checking the power from the house, should be 240 volts, then check the connection at the back of the dryer too check cord and connection, if all that checks out read the heat element for continuity and thermal fuse. Good luck
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Kenmore heavy duty dryer with model # c110854019. I observed lately that the dryer alarm keeps sounding and never stop sounding once the dryer finished the cycle drying time. Normally it was suppose to sound for just a little while to alert you that the requested drying time is...
My dryer is running without any heat, is there a thermostat or something similar that I can change or is this the end?
My dryer went out and neighbor gave my a older model Kenmore Heavy Duty dryer and said it worked.When I plugged it up it worked fine but it concerns me because if you look behind it while its on and running there is a red glow.If its off its not there.Ive never seen a dryer do this before is it...
The Heating Element is working, the belt is fine and there is power to my dryer but when you push the start button it does not start. Please help... Thanks.
View more questions Search
|
