 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
91 crx intake
Ok, I have that a/f mix problem. I am going to do the tests I need to do, BUT I was thinking if the ECU ends up OK but I still have a problem with the car starting and a/f mix, can I use an intake off a d15 block and put it on the ZC motor and it work just the same? I don't know what kind of intake I have on my engine now, as it was on the old motor I did the swap with. Will it work though? Can I still use the PM6 ECU with that intake? I'm just trying to think of a way to get the car to run right!
|
||||
Check out some similar questions!
I recently installed a wall mounted exhaust fan (about 260 cfm) in a 2 car garage in Arizona (20x20x10high). I run this fan periodically to remove exhaust fumes and to suck out hot air. My garage is fairly tight as far as the seals are concerned and I've determined that I need a fresh air vent in...
What is the safest but the least amount of calories you should have daily. I have been cutting down my calorie intake to about 500 to 700 calorie for the last couple days. Im not sure if I should be eatting more but 1000 calories seems like a lot -- and I'm trying to lose weight. Anyhelp would be...
I have a crx with 172000 miles on it. Here's the background.I got the crx about a year ago and have maintained the car well ( full sythetic oil, premium gas, fuel injector cleaner, c/a intake, headers). The problem started after I was flushing my coolant, cleaning the throtle body, and degreasing...
My A/C wasn't putting out cold air. I checked the outside unit and discovered that a plastic drycleaning bag had been sucked onto the air intake side of the "box" and was totally covering the air intake. I removed the plastic bag and the unit has been working, but I don't think that it is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
