Ask Experts Questions for FREE Help !
Ask
    micheal25's Avatar
    micheal25 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 28, 2012, 06:46 PM
    No running water?
    No running water, replaced pressure switch on pressure tank, have power but tank won't charge... HELP!
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Mar 29, 2012, 03:09 AM
    The main question you need to address is this: Is the pump coming on? Check your switch and see if the points are closed (touching). If so, then is this pump above ground or in the well? If it is above ground, then it's easy to check and see if the pump is cutting on. If in the well, you can probably just feel the wellpipe and see if you can detect a slight "humming" vibration to see if the pump is running.

    I am, of course, assuming the breaker is turned on and the pressure gauge is reading at or near zero.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bathtub leaks only when water is running out of tub spout not when shower is running [ 4 Answers ]

Bathtub on 2nd floor is leaking to unfinished basement ceiling below. It only leaks however when the water (both hot and cold) is running out of the tub spout. It does not leak once the shower is turned on--nor does the tub leak when it's draining. Can anyone give a best guess exactly where the...

How do I stop water running through my shower head when I run the bath water [ 2 Answers ]

When I turn the faucet on in my bathtub, some of the water runs through the shower head. The diverter is in the spigot. This was part of a remodel in the bathroom. There was only a tub, then a wall was added and the shower head installed. Should the faucet fixture have been replaced?

I am running a water distiller with a continuous water fill supply. I need to chang ou [ 0 Answers ]

Can I use a 240 volt, 4500 watt heating element in place of a 120v,1500 watt element? My appliance is a water distiller with a 10 in. square boiling tank that is on automatic fill (as a little is distilled out, more water comes in to keep it full) My wiring is 110. My breakers are 20amp. The...

Why do I hear water running in my pipes, in a hot water heating system? [ 2 Answers ]

I have a hot water heating system and just recently , I am hearing water running in the pipes all the time.What could be causing this? Please help.

Bath tub shower spout & head running water running at same time [ 1 Answers ]

I started with a slight dripping problem(sayko system).i decided to replace all 3 stem assemblies together as they all were about 18 years old.after reassembling the new stems(danko brand),turned on the water supply & checked faucets.hot & cold worked fine but when the shower was turned on,water...

View more questions Search