Ask Experts Questions for FREE Help !
Ask
    Deelamondra's Avatar
    Deelamondra Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 27, 2012, 07:28 AM
    Carrier furnace is not igniting
    I have a electronic ignition system Carrier furnace. When I went to turn it on, only the fan turns on and the furnace is not attempting to ignite. Any ideas?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Mar 27, 2012, 11:47 AM
    Bad igniter,, maybe
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

58STA110 Carrier furnace not igniting [ 1 Answers ]

Same problem as I've seen on site, but my question isWHERE is the hot surface igniter supposed to be? I traced the wires from the control board and they go to a plug that is not connected and it looks like it can't reach anything(too short) how did this ever work? Moved into house during summer....

Furnace not igniting. [ 6 Answers ]

Also how does my control board know the difference between Heat Pump or Gas heat? It is no longer a heat pump system as I changed my ac and its just electric.

58STA110 Carrier furnace not igniting [ 3 Answers ]

Hi all, I have a 58STA110 Carrier furnace manufactured in Oct of 02 that is not igniting. Cooling is fine. The induction fan starts and runs for a few seconds. I hear and smell the gas start blowing, but after a few seconds the gas shuts off followed by the fan cutting of several seconds later....

Bryant Furnace not Igniting [ 1 Answers ]

I have a Bryant 350MAV036060 natural gas furnace. The blower is running non-stop, but there is no ignition. Also, there is no power at the thermostat. I tried resetting the furnace by turning it off for about 5 minutes then turning it back on, but the only thing that happens is the blower starts...

View more questions Search