Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
KTE 308-A 3 speed pull chain switch
[ 15 Answers ]
I have an old SMC ceiling fan and I have to replace the 3 speed pull chain switch because the neck is broken on it. All the universal switches on sale on the market do not work because they are wired differently inside. The switch is a KTE 308-A (made in Japan ) I have contacted the company in...
Pull chain 3 speed fan switch
[ 0 Answers ]
The chain pulled out of my neighbors ceiling fan switch. Her son-in-law took the switch out. Of course he didn't label the wires. I need to know if anyone recognizes the color code for the switch. The fan has no light and is three speed. There is a removable connection with nine wires. The...
Ceiling Fan 3 Speed Pull Chain
[ 1 Answers ]
I just purchased a new switch for my ceiling fan. I installed it and the fan still doesn't work. The new switch has L,1,2,3 on the casing and at first I was trying to figure out which wire went where. However the old one had the same L,1,2,3 so I took the wires out of the old one, one at a time...
3 speed ceiling fan, pull chain NOT broken, doesn't work!
[ 2 Answers ]
I've read through about 100 questions/answers about the pull chain on a ceiling fan that turns on the fan (one pull), then controls speed by pulling the chain once for each speed reduction (3 speeds). My chain isn't broken. It just doesn't do anything when I pull it. I've read one response... View more questions Search
|