[Sonam.C]

Sunshine beach Company manufactures suntan oil called Surtan, in 11-ounce plastic bottles. Surtan is sold in a competitive market. As a result, management is very cost-conscious. Surtan is manufactured through two process processes: mixing and filling. Materials are entered at the beginning of each process and labor and manufacturing overhead occur uniformly throughout each process. Unit costs are based on the cost per gallon of Surtan using the weighted-average costing approach.
On June 30, 2010, Jill Ritzman, the chief accountant for the past 20 years, opted to take early retirement. Her replacement, Sid Benili, had extensive accounting experience with motels in the area but only limited contact with manufacturing accounting. During July, Sid correctly accumulated the following production quality and cost data for the Mixing Department.
Production quantities: Work In Process, July 1, 8,000 gallons 75% complete; started into production 91,000 gallons; work in process, July 31, 5,000 gallons 20% complete. Materials are added at the beginning of the process.
Production costs: beginning work in process $88,000, comprised of $21,000 of materials costs and $67,000 of conversion costs; incurred in July: materials $537,000, conversion costs $769,000.
Sid then prepared a production cost report on the basis of physical unit started into production. His report showed a production cost of $15.71 per gallon of Surtan. The management of Sunshine Beach was surprised at the high unit cost. The president comes to you, as Jill's top assistant, to review Sid's report and prepare a correct report if necessary.
Required:
A) Show how Sid arrived at a unit cost of $15.71 per gallon of Surtan.
B) What error(s) did Sid make in preparing his production cost report?
C) Prepare a correct production cost report for July.