 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have two wall switches for a ceiling fan and light kit. Originally only the fan was installed. I am now adding a light kit to the fan. I installed the kit to the fan and wired the blue to black and white to white, but the light will not operate from the wall switch. Upon opening the switch...
Still having trouble.. I tried all combinations on dip switch in remote.. I took cover off from ceiling.. it does not have a dip switch.. it has something called a smart remote inside, I tried moving the one switch it had.. no luck... fan makes a low beep sound continually.. I tried removing...
I had replaced pull-chain switch on the Hampton Bay celling fan,that had pull-chain broken off, not realizing that this fan is remote controlled. So I wired black wire from switch to black wire that was coming down from fan and the other black wire from pull chain switch to white wire.It tripped...
I just installed a new Hunter ceiling fan and had a question about acceptable wire placement. The manual says to push all wires up into the outlet box, but it's a pretty tight space. I put the ground wire and the white wires into the outlet, but for the time being I left the black wires in the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
